To promote fellowship among the branches and members, a National Show, hosted by one or more of the branches is held annually. The location alternates between the eastern and western areas of the nation. The Regional Shows, hosted by one or more branches within each of the six regions, may be held annually.
The National/Regional Show Coordinator selects the branches to host the national and regional shows in numerical order, by branch number. Ideally, this is done two years in advance which gives the branches adequate time to plan for these special shows. If a branch declines their opportunity to host a show the opportunity is passed to the next branch number. Branches may combine with one or more branches and host a show together.
The Board of Directors approves the dates, locations, and host branches.
Each year the National sends $1000 to Branch hosting a National Show and $300 to each of 5 Branches hosting a Regional Show.
To determine the sequence of a branch’s position on the show schedule contact the National/Regional Show Coordinator or the National Secretary listed on the Administration web page.
Branches chosen to host the National and Regional shows are selected as follows:
- National shows are selected by the next Branch number within one of three annually rotating divisions. Starting in 2017 the three annual rotating divisions for National Show are: NE/SE, NC/SC, NW/SW.
- Regional shows are selected by the next Branch in that region each year. Except there will be NO Regional show within region the National show is held.
(How to prepare to host a local, national or regional show)
See where and when EDGE&TA members are meeting and participating in Branch and community events and come join us!
Tractor Pull, Parade and many events to enjoy
This is our Labor Day Show lots of antique tractors and old engines. Parade downtown on Saturday with entertainment and food on sight. This is a nice friendly show come join us.
Tractor & Engine Show, Plow Day starting at noon on Friday, Tractor Pull, Demonstrations, Children’s activities, Auction at noon to benefit Scholarship Fund. Evening meal at 5:30 on Saturday.
This is not an EDGE&TA event. Static display of tractors, engines, and antique trucks.
Static tractor/engine show at the Pioneer Museum in Aztec, New Mexico. Parade on Main Street for those interested in participating.
Branch 19’s annual museum show with tractor displays, engine displays, and antique vehicle displays. Tractor pulls on Friday and Saturday. Kiddie Tractor pulls on Saturday. Craft sales on Saturday. Silent Auction on Saturday.
Antique Tractor and engine show Weekends only.
Ozarks Older Iron Club’s 30th annual fall show and tractor pulls featuring Farmall tractors and Maytag gas engines. Gates open 9:00 am with tractor parade at 11:00 am each day. Tractor pulls Friday at 5:00 pm and Saturday at 3:00 pm with multiple exhibits and demonstrations throughout the day. Facilities are handicap accessible with chauffeured golf carts available. Limited primitive camping and RV parking available and great food at the cook shack. Call 417-948-2631 for more information.
2017 EDGETA National & Regional Show Schedule
Branch 42 – Muskegon County Fair Grounds, Fruitport, Michigan
June 8,9,10, 2017 (Thursday-Saturday) web: antiquefarmpowerclub.biz
Contacts: Keith Anderson 616-887-8708 email: [email protected]
Dan Engle 616-887-7462
NC: Branch 1, Almemund Threshing Show
17760 St. Crox Trail, Taylor Falls, Minnesota
August 11-12-13, 2017
Contact: Nancy Nelson email: [email protected]
SC: Branch 199 – Tri County Antique Tractor Club
March 18, 2017
Richard Hawkins, [email protected] 870-613- 1786
Ron Lyons email: [email protected]
Melvin Hawkings 870-834-2669
NE: NO REGIONAL SHOW IN REGION HOSTING NATIONAL SHOW
SE: Branch 125 – Denton Farm Park-SE Old Thresher’s Reunion
1072 Crawford Rd, Denton, North Carolina
June 30-July 4, (Friday-Tues)
Joe Daughridge – [email protected], 919-422-0454
Judd Edeburn – 919-880-4418
2018 EDGETA National & Regional Show Schedule
2018 National EDGETA Meeting
Host, Branch 107, Emporia, Kansas
June 29-30, 2018
Will have more specifics later on exact location.